All drilled. Holes are SHARP, and metal slivers HURT! Use gloves and file everything down.
|
Apply a thin layer of heat sink compound and bolt everything together
|
CG2000 Enclosure
|
I used heavy duty dongles, so I had to cut the holes bigger
|
I needed maximum space, so I mounted my board all the way to the hinge side
|
The first set of wires
|
Cut wires to correct length
|
Be neat
|
Tie grounds from 1-12 to first power cord ground, 13-24 to second. DONE!
|
|
|
