Welcome to LandOLights.com!

Home arrow Pictures & Video arrow Pictures
Home » 2010 Photos » RGB Floodlights » Rainbow Flood Construction
Back to Category Overview
Rainbow Flood Construction

In the Kit:  LEDs (R,G,B), Resistors (large & small), RJ45 jacks
In the Kit: LEDs (R,G,B), Resistors (large & small), RJ45 jacks

You may need to bend the resistors closer to the body than you are used to
You may need to bend the resistors closer to the body than you are used to

Install the 12 small resistors
Install the 12 small resistors

Install the 6 large resistors
Install the 6 large resistors

Carefully check the LEDs.  This incorrect one made it into my kit
Carefully check the LEDs. This incorrect one made it into my kit

Install the Red LEDs.  Remember to match the cut out to the silkscreen
Install the Red LEDs. Remember to match the cut out to the silkscreen

I like to only solder one pin on each LED, and then come back later to ensure they are straight
I like to only solder one pin on each LED, and then come back later to ensure they are straight

The green and blue LEDs are installed the same way
The green and blue LEDs are installed the same way

Install the 2 jacks.  Done!
Install the 2 jacks. Done!
 
There are 9 pictures in this category.
Back to Category Overview

In total there are 333 pictures in the categories.
Version 2.5.1, BUILD 20080226
The Christmas Lights WebRing by tfischer
[ Join Now | Ring Hub | Random | << Prev | Next >> ]
(C)2006-2016 LandOLights.com/loltechnical.com. All rights reserved.