Welcome to LandOLights.com!

Home arrow Pictures & Video arrow Pictures
Home » 2009 Photos » Ren Enclosure Construction
Back to Category Overview
Ren Enclosure Construction

Tools required 1
Tools required 1

Tools Required 2
Tools Required 2

A vise will come in handy
A vise will come in handy

Supplies - Wire Nuts, Aluminum angle, Nuts/Screws, Zip Ties, Washers, Heat Sink Compound
Supplies - Wire Nuts, Aluminum angle, Nuts/Screws, Zip Ties, Washers, Heat Sink Compound

Clamp aluminum in vice, and cut to length
Clamp aluminum in vice, and cut to length

Edges are SHARP!  File them
Edges are SHARP! File them

Ensure your Ren24 is not FLEXED out of shape.  Insert aluminum, mark holes.
Ensure your Ren24 is not FLEXED out of shape. Insert aluminum, mark holes.

Use a punch (or a screwdriver) to dimple marks
Use a punch (or a screwdriver) to dimple marks

A drop of oil will keep your drill bit cool and sharp
A drop of oil will keep your drill bit cool and sharp
 
There are 18 pictures in this category.
«« Start  « Prev  [1]  2  Next »  End »»
Back to Category Overview

In total there are 333 pictures in the categories.
Version 2.5.1, BUILD 20080226
The Christmas Lights WebRing by tfischer
[ Join Now | Ring Hub | Random | << Prev | Next >> ]
(C)2006-2016 LandOLights.com/loltechnical.com. All rights reserved.